2022-11-05
At present, it is not only in the automotive world that there are signs of a change to electromobility. The material handling equipment industry has long been a pioneer in this field. For some time now, there has been increasing demand for electric forklifts instead of IC engine-powered trucks. The challenge: to ensure the same high vehicle availability as with trucks powered by internal combustion engines. This is where Li-ION technology comes into play. It has proven its worth in everyday use - in smartphones, for example - and offers a whole series of advantages over lead-acid batteries in forklifts:
1.SHORT AND QUICK RELOADING
Battery can be recharged even during short breaks, meaning costly and time-consuming battery changes are no longer necessary.
2.HIGHER ENERGY EFFICIENCY
Up to 30 percent more energy thanks to higher energy density and high overall system efficiency.
3.POWERFUL SYSTEM
No loss of performance even with decreasing battery charge.
4.USER-FRIENDLY SOLUTION
No leaking of hazardous battery gases and acids. Maintenance-free and easy to clean.
| Model | 48V-600Ah | |
| Capacity(0.2C5A) | 600Ah | |
| Nominal Voltage | 48V | |
| Max. Charge Voltage | 58.4V | |
| Discharge Cut-off Voltage | 40V (recommended) | |
| Charging Voltage | 58.4V±0.03V | |
| Continuous Discharge current | 300A | |
| Peak Discharge current | 1000A within 5 Seconds | |
| Weight (Approx.) | 260Kgs | |
| Battery Dimensions | 646*197*574mm(LXWXH) | |
| Impedance (Max, at 1000Hz) |
(Single cell 25Ah) ≤3mΩ | |
| Cycle Life(80DOD%) | >3000 Times | |
| Self-discharge Rate | ≤3%(month) | |
| Charger | 100A(2hrs) | |
| Operating Temperature | Charge | 0ºC~60ºC;32oF~140oF |
| Discharge | -20ºC~80ºC;-4oF~176oF | |
| Storage | -20ºC~60ºC;-4oF~140oF | |
Send your inquiry directly to us
